For podcasters

Podcast setup for two

Two hosts at one table: two PodMic USB on PSA1+ arms, two pairs of NTH-100 and the RØDECaster Duo that mixes and records it all.

Right for you if two people record a podcast together at one table.

Read the content creation guide

Sound flow

RØDECaster DuoRØDE 1/4-inch headphone output, one per hostNTH-100RØDE
PhoneYour deviceBluetooth, for a call-in guestRØDECaster DuoRØDE
RØDECaster DuoRØDE USB-C, or record to microSDComputerYour device
Set total $1,566.907 pieces and 2 cables, at today's prices.Shop podcast and streaming mics

Cables you need

Cables total$53.90

How it connects, step by step

  1. Clamp a PSA1+ arm to the table for each host (up to 70 mm, about 2.75 in, thick) and mount a PodMic USB on each.
  2. An XLR cable from each PodMic USB into the Duo's two combo inputs. Leave 48 V phantom power off; the PodMic USB does not need it.
  3. NTH-100 into each of the Duo's two 1/4-inch headphone outputs (adapter in the box). The main host takes output 1.
  4. Power the Duo with its adapter. To stream or record on a computer, connect it with the USB-C cable in the box; or record straight to a microSD card (not included).
  5. Each host speaks 2–4 inches (5–10 cm) from the grille.
  6. A guest can call in by phone: pair it over Bluetooth (settings cog > System > Bluetooth), put the Bluetooth channel on a fader and turn on mix-minus in its Output Routing, so the caller does not hear their own voice back.

Every step is from the makers' own manuals and product pages, checked October 2026.

Podcast setup for twoSet total $1,566.90
Or start from scratch

Create your flow

Pick a piece for each role and we draw how the sound flows, add up the price and list the cables as you go. Bring the link to the store and we will check it with you.

Start your flow

Share your setup

Post it to your story or send it to a friend.

Making your picture…